Chrome Rocker Panels: Upper and Lower Sections

8 PC. Chrome Rocker Panels: Upper Section

6 PC. Chrome Lower Accent Trim

JUST ARRIVED and In Stock! We have now available and in stock a set of chrome stainless rocker panels in different styles for the newly redesigned 2011-Up Chrysler 300!

We also receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels for the 2011-Up Chrysler 300. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

___________________________________________________________________________

Our chrome rocker panels quickly attaches over the top of your existing vehicle body!

Our rocker panels are manufactured from the highest quality grade of stainless steel available. You can be assured of a super long lasting and rust-free chrome rocker panels for your vehicle.

Our chrome rocker panels are highly polished to a brilliant chrome finish!

Our chrome rocker panels are made to exactly custom fit your vechicle for an exact fit.

Our chrome rocker panels have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Chrome Rocker Panels

Chrome Rear Tailgate Trim

JUST ARRIVED and In Stock! We have now available and in stock a set of chrome stainless rocker panels and rear tailgate trim for the newly redesigned 2011-Up Ford Explorer!

We also receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels for the Ford Explorer. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

___________________________________________________________________________

Our chrome rocker panels quickly attaches over the top of your existing vehicle body!

Our rocker panels are manufactured from the highest quality grade of stainless steel available. You can be assured of a super long lasting and rust-free chrome rocker panels for your vehicle.

Our chrome rocker panels are highly polished to a brilliant chrome finish!

Our chrome rocker panels are made to exactly custom fit your vechicle for an exact fit.

Our chrome rocker panels have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

JUST ARRIVED and In Stock! We have now available and in stock a set of chrome stainless rocker panels for the newly redesigned 2011-Up Ford Superduty!

We also receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels for the Ford Superduty. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

 Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

 ___________________________________________________________________________

Our chrome rocker panels quickly attaches over the top of your existing vehicle body!

Our rocker panels are manufactured from the highest quality grade of stainless steel available. You can be assured of a super long lasting and rust-free chrome rocker panels for your vehicle.

Our chrome rocker panels are highly polished to a brilliant chrome finish!

Our chrome rocker panels are made to exactly custom fit your vechicle for an exact fit.

Our chrome rocker panels have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

We carry a huge assortment of body side molding trim kits that can fit any vehicle on the road! Much of our body side molding trim is the universal style which can be easily cut and trimmed to fit any vehicle! We also have available many factory OEM styles of body side molding that are made to exactly match the type that was available from the factory. Best of all our body side molding trim can be easily installed in just minutes for a very low cost. This is truly a quick and inexpensive way to customize any vehicle!

Our body side molding quickly attaches over the top of your existing vehicle body panels in seconds!

Our body side molding is available in many different universal and or factory OEM styles and widths!

Our body side molding can easily fit any vehicle by just trimming the length of each piece with a utility knife.

Our body side molding is available with factory formed tips on a few select styles!

Our body side molding is manufactured from the highest quality of OEM approved ABS available. You can be assured of a highly durable and long lasting body side molding for your vehicle!

Our body side molding have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

Our body side molding is easily installed by cleaning and prepping the surface; then peeling off the backing of the pre-applied self adhesive tape and applying to the surface. It’s that quick and easy!

RECEIVE A 10% DISCOUNT ON ANY BODY SIDE MOLDING TRIM KIT!
Enter Coupon Code: BLOG10 when placing your order.

We have just introduced a new line of chrome accessories for the 2010-Up Ford Taurus. These items are guaranteed to add some true bling to the Ford Taurus! Best of all you can easily install any of these items in just minutes at a very low cost! These items would have been a highly desirable option from the factory if Ford had offered them. If you have any further questions; or if you wish to place an order for any of these items; please contact us. If you order (3) or more items; we can give you a special package deal price.

Chrome Rocker Panels: 8 PCS. 1&5/8" High

Chrome Pillar Posts: 10 PCS.

1 PC. Chrome Rear Bumper Trim

Chrome Fender Trim: 4 PCS.

Our chrome accessories quickly attaches over the top of your existing vehicle body!

Our chrome accessories are manufactured from the highest quality grade of stainless steel available. You can be assured of a super long lasting and rust-free chrome accessories for your vehicle.

Our chrome accessories are highly polished to a brilliant chrome finish!

Our chrome accessories are made to exactly custom fit your vehicle for an exact fit.

Our chrome accessories have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

RECEIVE A 10% DISCOUNT ON ANY CHROME ACCESSORY ITEM FOR THE FORD TAURUS!
Enter Coupon Code: BLOG10 when placing your order.