8 PC.; 3.75" High Chrome Rocker Panels

8 PC.; 1.00" High Chrome Side Accent Trim

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY CHROME ACCESSORY FOR THE CADILLAC SRX!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Tail Light Guards for the Honda Ridgeline is a very popular item that many of our customers purchase. Our Tail Light Guards for the Honda Ridgeline are very easy to install since the tail light guards easily installs over the top of your existing tail light lenses in just minutes. Best of all there are no exterior holes that need to be drilled in order to install this item!

Our Tail Light Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish! Many of our competitors sell the much cheaper in price and quality the chrome plated steel version which will flake off and rust.

Our Tail Light Guards are made from 3/4″ and 5/16″ high strength round steel tubing!

Our Tail Light Guards are made to exactly custom fit your vehicle without any drilling or modifications. Our Tail Light Guards easily mounts to the existing holes in the body. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to use a screwdriver; then it’s that simple and easy to install!

Our rust free stainless steel version of Tail Light Guards comes with a full lifetime warranty!

RECEIVE A 10% DISCOUNT ON ANY SET OF TAIL LIGHT GUARDS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Grille Guards for the Nissan Titan are very easy to install since the Grille Guard is a 1 PC. welded unit that is already pre-assembled making installation extremely easy. In addition the grille guard is basically an easy bolt on item since it easily bolts to the existing holes that are already in the frame chassis; which means that no-drilling is required.

Our Grille Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish! Many of our competitors sell the much cheaper in price and quality the chrome plated steel version which will flake off and rust.

Our Grille Guards are a welded 1 piece design for superior strength; unlike our competitors which sell the much cheaper and inferior 3 piece bolt together design!

The small tubing which covers the headlights can be easily removed for either looks, or for any repairs to the headlights!

You can easily install any auxiliary lighting by using any of the pre-drilled holes!

Our Grille Guards are made to exactly custom fit your vehicle without any drilling or modifications. Since the Grille Guard is already pre-assembled; it easily bolts to the existing holes in your frame. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to operate a socket wrench; then it’s that simple and easy to install!

Fully Guaranteed! Our rust free stainless steel version of Grille Guards comes with a full lifetime warranty. The black powder coated versions carry a (3) year warranty.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY GRILLE GUARD!

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our running boards for the 2008- Up Dodge Grand Caravan mini van are fairly easily installed without too much difficulty. In fact we just recently received a complimentary letter from one our many satisfied customers who happened to be a very small and petite lady who was able to install this item by herself very easily. She commented to the fact that the installation instructions were terrific and easy to follow. We tell our prospective customers that if a very small and petite lady is our able to install these running boards by herself; then just about anyone with basic tools can install this item!

Our running boards come with permanently mounted black step pads for each door.

Our running boards are made from super high strength material that is reinforced with a steel plate that is molded into the running boards themselves. This will assure you of a highly durable and functional running boards for years to come.

Our running boards come in a UNPAINTED SATIN BLACK finish.

Our running boards are made to exactly custom fit your vehicle for a precise fit, unlike our competitors which sell the universal; one size fits all running boards which will require modifications to your vehicle.

We offer free factory technical support for product or installation issues. All mounting hardware and installation instructions are included.

PRE-PAINTING IS AVAILABLE!
If your vehicle is less than 3 years old; we offer  pre-painting for an “ADDITIONAL CHARGE” to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle and we will have this item painted to factory OEM  specifications. We guaranty factory color match to most vehicle OEM colors!

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY SET OF RUNNING BOARDS!

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our running boards for the 2008- Up Chrysler Town & Country mini van are fairly easily installed without too much difficulty. In fact we just recently received a complimentary letter from one our many satisfied customers who happened to be a very small and petite lady who was able to install this item by herself very easily. She commented to the fact that the installation instructions were terrific and easy to follow. We tell our prospective customers that if a very small and petite lady is our able to install these running boards by herself; then just about anyone with basic tools can install this item!

Our running boards come with permanently mounted black step pads for each door.

Our running boards are made from super high strength material that is reinforced with a steel plate that is molded into the running boards themselves. This will assure you of a highly durable and functional running boards for years to come.

Our running boards come in a UNPAINTED SATIN BLACK finish.

Our running boards are made to exactly custom fit your vehicle for a precise fit, unlike our competitors which sell the universal; one size fits all running boards which will require modifications to your vehicle.

We offer free factory technical support for product or installation issues. All mounting hardware and installation instructions are included.

PRE-PAINTING IS AVAILABLE!
If your vehicle is less than 3 years old; we offer  pre-painting for an “ADDITIONAL CHARGE” to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle and we will have this item painted to factory OEM  specifications. We guaranty factory color match to most vehicle OEM colors!

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY SET OF RUNNING BOARDS!

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!