We’ve got a super sharp looking body ground effects kit for the 2005-Up Pontiac G6. This body ground effects kit is available in either the 2 Door; or the 4 Door versions of the Pontiac G6. This body ground effects kit is guaranteed to transform any Pontiac G6 into one real head turner that will draw the admirations of many people!  

 Our body kits; ground effects comes with the front and rear air dams which easily install over the top of your existing bumpers which are required. Also a complete pair of side skirts are included as well.

All mounting hardware and installation instructions are included. We offer free factory technical support for product or installation issues.

Optional wire mesh screen kits for the openings in the front and rear air dams are available depending upon the vehicle application.

  Optional chrome exhaust extension tips are available depending upon the vehicle application.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY BODY GROUND EFFECT KIT!

Yes we do now have in stock for immediate shipment a truly sharp looking body ground effects kit for the 2010-Up Chevy Camaro. These body kits are available in either the V6 or the V8 versions. They are guaranteed to give the 2010-Up Chevy Camaro a truly agressive and high performance look.

Our body kits; ground effects comes with the front and rear air dams which easily install over the top of your existing bumpers which are required. Also a complete pair of side skirts are included as well.

Optional wire mesh screen kits for the openings in the front and rear air dams can be purchased separately for select vehicles.

Our body kits; ground effects are made from super high strength composite ABS which is nearly indestructible. Many of our competitors sell the much cheaper and inferior fiberglass material type which can be easily chipped or broken; requiring expensive repair work.

Our body kits; ground effects comes with a full lifetime warranty on all parts! Many of our competitors do not offer this.

Our body kits; ground effects are made to exactly custom fit your vehicle for a precise fit.

Our body kits; ground effects are available pre-painted for an additional charge to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle, and we will have this item painted to factory OEM specifications.

All mounting hardware and installation instructions are included. We offer free factory technical support for product or installation issues.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY BODY GROUND EFFECT KIT!

Yes we strongly believe that Ford should have offered a nice body ground effects kit for the 2010-Up Ford Fusion. Our body ground effects sure gives the Ford Fusion that aggressive and high performance muscle car look for a very fair price.

Our body kits; ground effects comes with the front and rear air dams which easily install over the top of your existing bumpers which are required. Also a complete pair of side skirts are included as well.

Optional wire mesh screen kits for the openings in the front and rear air dams can be purchased separately for select vehicles.

Our body kits; ground effects are made from super high strength composite ABS which is nearly indestructible. Many of our competitors sell the much cheaper and inferior fiberglass material type which can be easily chipped or broken; requiring expensive repair work.

Our body kits; ground effects comes with a full lifetime warranty on all parts! Many of our competitors do not offer this.

Our body kits; ground effects are made to exactly custom fit your vehicle for a precise fit.

Our body kits; ground effects are available pre-painted for an additional charge to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle, and we will have this item painted to factory OEM specifications.

All mounting hardware and installation instructions are included. We offer free factory technical support for product or installation issues.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY BODY GROUND EFFECT KIT!

Here are some FAQ’s that we quite often receive from customers about installing one of our Body Ground Effects Kits.

Q. How will the Body Ground Effects Kit mount to my car or truck?

A. All Body Ground Effects Kits come with mounting hardware and instructions. A typical mounting hardware package includes all necessary indicated screws and a tube of adhesive caulk. Most packages include double sided tape which is used to hold the parts on the vehicle while the adhesive caulk cures (it takes 24 hours to cure properly). Some people like to use additional adhesives so we include a list of several “quick setting adhesives” as part of our “Installation Tips” instructions that come with each Ground Effects Package box. These additional adhesives can be purchased separately from a body shop/paint supply company in your area. These adhesives can sometimes make the installation easier, but they are not necessay.

Q. Can I install a Body Ground Effects Kit myself?

A. Yes, but we suggests that two (2) people work together to install a Body Ground Effects kit.

Q. Why does it take two (2) people to install a Body Ground Effects Kit?

A. All Front and Rear Air Dams for Body Ground Effects Packages are designed to fit from wheel well to wheel well. This design creates “large” pieces which allows all Body Ground Effects Packages to prevent unsightly seams or joints, as well as providing excellent fit and design continuity These large pieces are difficult for 1 person to handle, especially after they have been painted. You wouldn’t want to scratch them while you’re installing them; so the extra hands to hold them are always helpful.

Q. What tools will I need to install a Body Ground Effects Package?

We would suggest that you have the following basic tools available:

• Box cutter / Razor knife — to trim the plastic parts if any minor trimming is needed.
• Cordless power drill — to drill screw holes
• Full screwdriver set — to put in the screws
• Full drill bit set — to drill screw holes.
• “Caulk gun” — to apply the adhesive caulk that comes with the kit.
• Sandpaper — to sand the parts, if necessary during the “fitting” process.

Q. How hard is it to install a Body Ground Effects package?

A. It’s not hard to install a Body Ground Effects package since the parts will fit very well. Occasionally a part may have to be “slightly” sanded by hand to get a perfect fit because of slight variations from vehicle to vehicle, but in most cases no sanding will be needed. Most routine Installers of Ground Effects say that our parts fit “the best of all” and “installing them is easy”. When you get the kit, before you take it to a body shop to get it painted, always “pre-fit” the parts on your car. You will then see how well the parts fit and how easy they will be to install.

Q. How long will it take to install a Body Ground Effects Package?

For someone who has never installed a Ground Effects Package before, (like most people) a typical Ground Effects Package should take between two (2) and three (3) hours to install. If you have experience installing Ground Effects type products, two people should be able to install the typical package in about an hour.

Q. Is there anything else I need to know before installing a Body Ground Effects Package?

A. Yes, we always STRONGLY suggests that exhaust turndowns or exhaust extensions be used with all Rear Air Dams. You must re-direct, or deflect, the heat coming out of the tail pipe away from all parts. If you are having a custom exhaust put on your car before you install your Ground Effects Package, it’s a good idea to take the Rear Air Dam to your muffler shop so they can use it to properly line up your exhaust when they install your custom exhaust.

In most cases, if you are installing driving lights or Mesh Screen with your Ground Effects Package, you need to check to see if the installation of that accessory onto the parts would be easier before the Ground Effects parts are installed onto the vehicle. Most of the time, it is definately easier to install the Mesh Screen onto the Ground Effects parts before the Ground Effects parts are installed onto the vehicle.

Q. Will I have to cut any part of my front or rear bumper cover to install my Ground Effects Kit?

A. On some models, it is necessary to trim part of the existing factory front or rear bumper cover so that the part fits perfectly, or simply to create a certain design look. When we design & make a Front or Rear Air Dam, we sometimes add driving light openings or an air intake hole to a Front Air Dam or some other design feature like dual exhaust cutouts on a Rear Air Dam. In some cases, this requires the existing factory front or rear bumper cover to be modified or trimmed, usually in just a small area. In any situation where you would have to trim away part of the existing factory bumper cover, the part will completely cover the small area you trim away. Precise instructions of what is to be trimmed away & how it is to be trimmed away are provided to you as part of the installation instructions. Since installing a Ground Effects Package on your car is a permanent add-on (just like the adding of a sunroof), we supply thorough installations for the do-it-yourself buyer.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY BODY GROUND EFFECT KIT!

2010 Ford Mustang Body Ground Effects Kit

Yes Razzi does make the very best body ground effects kits both in quality and overall looks that you can buy from any manufacturer. This is why we highly recommend their body ground effects kit and we are proud to be an authorized retailer of Razzi products.

Our body kits; ground effects comes with the front and rear air dams which easily install over the top of your existing bumpers which are required. Also a complete pair of side skirts are included as well.

Optional wire mesh screen kits for the openings in the front and rear air dams can be purchased separately for select vehicles.

Our body kits; ground effects are made from super high strength composite ABS which is nearly indestructible. Many of our competitors sell the much cheaper and inferior fiberglass material type which can be easily chipped or broken; requiring expensive repair work.

Our body kits; ground effects comes with a full lifetime warranty on all parts! Many of our competitors do not offer this.

Our body kits; ground effects are made to exactly custom fit your vehicle for a precise fit.

Our body kits; ground effects are available pre-painted for an additional charge to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle, and we will have this item painted to factory OEM specifications.

All mounting hardware and installation instructions are included. We offer free factory technical support for product or installation issues.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY BODY GROUND EFFECT KIT!