8 PC.; 3.75" High Chrome Rocker Panels

8 PC.; 1.00" High Chrome Side Accent Trim

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY CHROME ACCESSORY FOR THE CADILLAC SRX!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Rear Bumper Guard for the Ford Edge is a very popular item that many of our customers purchase. Our Rear Bumper Guard for the Ford Edge is very easy to install since the rear bumper guard easily installs over the top of your existing bumper in just minutes. Best of all there are no holes that need to be drilled in order to install this item; as it easily bolts to the existing holes in your frame!

Depending upon the vehicle application; our Rear Bumper Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish!

Our Rear Bumper Guards are a welded 1 piece design for superior strength.

Our Rear Bumper Guards are made to exactly custom fit your vehicle without any drilling or modifications. Since the Rear Bumper Guard is already pre-assembled; it easily bolts to the existing holes in your frame. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to operate a socket wrench; then it’s that simple and easy to install!

Our rust free stainless steel version of Rear Bumper Guards comes with a full lifetime warranty!

RECEIVE A 10% DISCOUNT ON ANY REAR BUMPER GUARD!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Rear Bumper Guard for the Toyota RAV4 is a very popular item that many of our customers purchase. Our Rear Bumper Guard for the Toyota RAV4 is very easy to install since the rear bumper guard easily installs over the top of your existing bumper in just minutes. Best of all there are no holes that need to be drilled in order to install this item; as it easily bolts to the existing holes in your frame!

Depending upon the vehicle application; our Rear Bumper Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish!

Our Rear Bumper Guards are a welded 1 piece design for superior strength.

Our Rear Bumper Guards are made to exactly custom fit your vehicle without any drilling or modifications. Since the Rear Bumper Guard is already pre-assembled; it easily bolts to the existing holes in your frame. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to operate a socket wrench; then it’s that simple and easy to install!

Our rust free stainless steel version of Rear Bumper Guards comes with a full lifetime warranty!

RECEIVE A 10% DISCOUNT ON ANY REAR BUMPER GUARD!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Rear Bumper Guard for the Nissan Xterra is a very popular item that many of our customers purchase. Our Rear Bumper Guard for the Nissan Xterra is very easy to install since the rear bumper guard easily installs over the top of your existing bumper in just minutes. Best of all there are no holes that need to be drilled in order to install this item; as it easily bolts to the existing holes in your frame!

Depending upon the vehicle application; our Rear Bumper Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish!

Our Rear Bumper Guards are a welded 1 piece design for superior strength.

Our Rear Bumper Guards are made to exactly custom fit your vehicle without any drilling or modifications. Since the Rear Bumper Guard is already pre-assembled; it easily bolts to the existing holes in your frame. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to operate a socket wrench; then it’s that simple and easy to install!

Our rust free stainless steel version of Rear Bumper Guards comes with a full lifetime warranty!

RECEIVE A 10% DISCOUNT ON ANY REAR BUMPER GUARD!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Tail Light Guards for the Honda Ridgeline is a very popular item that many of our customers purchase. Our Tail Light Guards for the Honda Ridgeline are very easy to install since the tail light guards easily installs over the top of your existing tail light lenses in just minutes. Best of all there are no exterior holes that need to be drilled in order to install this item!

Our Tail Light Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish! Many of our competitors sell the much cheaper in price and quality the chrome plated steel version which will flake off and rust.

Our Tail Light Guards are made from 3/4″ and 5/16″ high strength round steel tubing!

Our Tail Light Guards are made to exactly custom fit your vehicle without any drilling or modifications. Our Tail Light Guards easily mounts to the existing holes in the body. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to use a screwdriver; then it’s that simple and easy to install!

Our rust free stainless steel version of Tail Light Guards comes with a full lifetime warranty!

RECEIVE A 10% DISCOUNT ON ANY SET OF TAIL LIGHT GUARDS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We have a new line of chrome accessories for the 2007-Up Cadillac Escalade. These items are guaranteed to add some true bling to the Cadillac Escalade! Best of all you can easily install any of these items in just minutes at a very low cost! These items would have been a highly desirable option from the factory if Cadillac had offered them. If you have any further questions; or if you wish to place an order for any of these items; please contact us. If you order (3) or more items; we can give you a special package deal price.

Chrome Rocker Panels: 4 PCS. 6.00" High

Chrome Pillar Posts: 8 PCS.

1 PC. Chrome Rear Tailgate Trim

1 PC. Chrome Tailgate Handle

2 PC. Chrome Rear Window Trim

4 PC. Chrome Grille Trim

2 PC. Chrome Tail Light Trim

6 PC. Chrome Fender Trim

Our chrome accessories quickly attaches over the top of your existing vehicle body!

Our chrome accessories are manufactured from the highest quality grade of stainless steel available. You can be assured of a super long lasting and rust-free chrome accessories for your vehicle.

Our chrome accessories are highly polished to a brilliant chrome finish!

Our chrome accessories are made to exactly custom fit your vehicle for an exact fit.

Our chrome accessories have already pre-applied the highest grade of 3M adhesive tape available for permanent adhesion.

RECEIVE A 10% DISCOUNT ON ANY CHROME ACCESSORY ITEM FOR THE CADILLAC ESCALADE!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

Our Grille Guards for the Nissan Titan are very easy to install since the Grille Guard is a 1 PC. welded unit that is already pre-assembled making installation extremely easy. In addition the grille guard is basically an easy bolt on item since it easily bolts to the existing holes that are already in the frame chassis; which means that no-drilling is required.

Our Grille Guards are available either in rust free stainless steel that is highly polished to a brilliant chrome finish; or in a highly durable black powder coated finish! Many of our competitors sell the much cheaper in price and quality the chrome plated steel version which will flake off and rust.

Our Grille Guards are a welded 1 piece design for superior strength; unlike our competitors which sell the much cheaper and inferior 3 piece bolt together design!

The small tubing which covers the headlights can be easily removed for either looks, or for any repairs to the headlights!

You can easily install any auxiliary lighting by using any of the pre-drilled holes!

Our Grille Guards are made to exactly custom fit your vehicle without any drilling or modifications. Since the Grille Guard is already pre-assembled; it easily bolts to the existing holes in your frame. All mounting hardware and installation instructions are included. Free factory technical support is also provided. If you know how to operate a socket wrench; then it’s that simple and easy to install!

Fully Guaranteed! Our rust free stainless steel version of Grille Guards comes with a full lifetime warranty. The black powder coated versions carry a (3) year warranty.

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY GRILLE GUARD!

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We recently received the following letter from one of our customers who purchased and installed a set of our “Step Board” style of running boards for their vehicle. The lady was very hesitant before purchasing this item whether or not she could install this item by herself; or if she would need to have this item professionally installed. We told her that many of our customers are able to install this item fairly easily by themselves. Please read the following letter because we tell many prospective customers that if this lady can easily install this item by herself; then the vast majority of our customers can too as well.

Ron,

I am a 5’4″ 125 lb. woman and I bought running boards from you for my Mercury Mariner. Everyone said I was crazy for doing it myself but I got them on and they look great. The directions are easy to follow and once I got all my tools together it went very smoothly. The drivers side was my first attempt and it took about 3 hours. The passenger side took about 1.5 hours. I did have my husband come out and so some of the self starting screws when my arm got tired; but other than that the project was a success. I am very pleased with them. The paint color matches my SUV perfectly and really gives it a unified look. I put them on so my 3 year old son and my mom (double knee replacement) could get in the car without help; but I got a boost of self esteem at the same time.

Thanks for getting them here so quickly. Thanks for the great directions. Thanks for the quality product. I’ll definitely recommend you to friends and family. It was great working with you.

Sincerely,
Tracie Startzman-Glant
Danville, Indiana

Our running boards come with permanently mounted black step pads for each door.

Our running boards are made from super high strength material that is reinforced with a steel plate that is molded into the running boards themselves. This will assure you of a highly durable and functional running boards for years to come.

Our running boards come in a UNPAINTED SATIN BLACK finish.

Our running boards are made to exactly custom fit your vehicle for a precise fit, unlike our competitors which sell the universal; one size fits all running boards which will require modifications to your vehicle.

We offer free factory technical support for product or installation issues. All mounting hardware and installation instructions are included.

PRE-PAINTING IS AVAILABLE!
If your vehicle is less than 3 years old; we offer  pre-painting for an “ADDITIONAL CHARGE” to exactly match your vehicle color. Just provide to us the exact exterior paint code of your vehicle and we will have this item painted to factory OEM  specifications. We guaranty factory color match to most vehicle OEM colors!

MENTION THIS BLOG AND RECEIVE A SPECIAL DISCOUNT ON ANY SET OF RUNNING BOARDS!

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!

We receive numerous requests all of time from our prospective customers as how to properly install a set of our chrome rocker panels. We tell them that they can very easily install a set of our chrome rocker panels in just a very short time by following the below installation instructions:

1. VERIFY PARTS:

Please verify that you have received the correct pieces for your vehicle, as each piece should be clearly labeled as to where they should be attached to the vehicle.

2. CLEANING:

This is the most important step of all because if it not done properly, then the pieces will not properly adhere to the surface, resulting in the piece(s) not staying adhered to the surface.

Using a soft rag and “ACETONE” gently wipe the entire surface that needs to be cleaned. Then follow up by using another soft rag and “ALCOHOL” for the final cleaning process. A minimum of 2-3 minutes should be spent for each one of these cleaning processes.

3. FITTING:

Please dry fit each piece by holding it up to the surface. By doing so you will know ahead of time as to where to properly position each piece during the final application process.

4. APPLICATION:

Gently peel off the adhesive backing on the back side of each piece. Then very slowly position the top corners of each piece onto the surface, and by using slight pressure attach each piece to the surface. Be very careful as you only have one chance to properly position each piece into it’s proper place. If you try and lift up the piece to reposition it, you will put a permanent dent into that piece.

5. FINISHING:

Using firm pressure either by a soft rag or a rubber roller, go over each piece to make sure that it has firmly adhered to the surface. Then peel off the protective white coating off each piece to reveal the beautiful finish. You may then use a mild cleaner to remove any fingerprints if you so desire.

RECEIVE A 10% DISCOUNT ON ANY SET OF CHROME ROCKER PANELS!
Enter Coupon Code: BLOG10 when placing your order.

Providing Top Quality Products and Customer Service since 1999! Our huge inventory allows us to be your one stop shop for all of the latest Truck Accessories, Car Accessories, and SUV Accessories at Discount Prices! Contact us at Toll Free: 1-888-314-5310 before making your next purchase!